Conjunto de datos

N_H500 case from FLOW report "The sensitivity of blockage and wakes to...

Planar data extractions from the solution of the wind farm simulation with inflow conditions corresponding to the title.

CSV

N_H150 case from FLOW report "The sensitivity of blockage and wakes to...

Planar data extractions from the solution of the wind farm simulation with inflow conditions corresponding to the title.

CSV

Open-Source SCADA dataset

Is a SCADA dataset found on Zenodo. By comparing the metadata to recorded wind farms, one was able to associate these data with power/thrust curves and the wind resource...

Testfeld Bremerhaven dataset

The FLOW project is funded by the European Union Horizon Europe Framework program under grant agreement no. 101084205. The objective of the FLOW project is to develop methods to...

LES of a wind farm with 100 IEA 15 MW turbines in the ABL height of 500 m

The dataset of an idealised wind farm was generated using SOWFA-6 LES solver. The wind farm consists of 100 IEA 15 MW turbines arranged in a 10-by-10 staggered layout with 5D...

TXT

LES of a wind farm with 100 IEA 15 MW turbines in the ABL height of 150 m

The dataset of an idealised wind farm was generated using SOWFA-6 LES solver. The wind farm consists of 100 IEA 15 MW turbines arranged in a 10-by-10 staggered layout with 5D...

TXT

LES of a single IEA 15 MW turbine in the ABL height of 500 m

The dataset of a single IEA 15 MW turbine was generated using SOWFA-6 LES solver. This simulation requires time-series of atmospheric inflow data. The inflow was produced by a...

TXT

LES of a single IEA 15 MW turbine in the ABL height of 150 m

The dataset of a single IEA 15 MW turbine was generated using SOWFA-6 LES solver. This simulation requires time-series of atmospheric inflow data. The inflow was produced by a...

TXT

LES of an Atmospheric Boundary Layer with capping inversion height of 500 m

The ABL profile was generated using SOWFA-6 LES solver. The initial capping inversion height was set to 500 m. The mean wind speed and direction were controlled to the desired...

TXT

LES of an Atmospheric Boundary Layer with capping inversion height of 150 m

The ABL profile was generated using SOWFA-6 LES solver. The initial capping inversion height was set to 150 m. The mean wind speed and direction were controlled to the desired...

TXT

Modelling of LLJ - temperature cooling at ground

This dataset contains results of a simulation of a Low-Level Jet based on a flow transitioning from onshore to offshore for the given ground conditions. Obtained with LES on...